HighDeformWeld Deformation behaviour of welded high and ultra-high-strength connections in steel constructions

Abstract

In accordance with DIN EN 1993-1-8, welded joints must be designed with sufficient deformation capacity; however, the ductility of the welds must not be taken into account in the design. Consequently, the reduction of stress peaks is assumed, but plastic deformation should be avoided in the calculations.

As part of the research project, the deformation capacity of high-strength and ultra-high-strength welded joints is to be evaluated. In particular, suitable strain criteria for welds must be defined for the increasingly relevant numerical design to enable safe and economical design. Furthermore, welding process optimisations aimed at achieving greater deformation capacity are to be developed.

For this purpose, extensive experimental investigations will be carried out on butt joints, longitudinal fillet joints and cruciform joints. Furthermore, tests are planned on hybrid beams with S355 (web) and S960 (flange). In addition to the investigations into deformability, the design concepts for butt and fillet weld joints are to be extended up to S1100 on the basis of the investigations carried out.

Participating Research Institution

University of Stuttgart
Institute of Structural Design
Pfaffenwaldring 7
70569 Stuttgart, Germany
Prof. Dr. sc. techn. habil. Markus Knobloch
Dr.-Ing. Stefanie Röscher
Mareike von Arnim, M. Sc. (Bearbeiterin)

Technische Universität Ilmenau
Department of Mechanical Engineering, Production Technology Group
Gustav-Kirchhoff-Platz 2
98693 Ilmenau, Germany
Univ.-Prof. Dr.-Ing. habil. Jean Pierre Bergmann
Dr.-Ing. Jörg Hildebrand
Stefan Eichler (Bearbeiter)

Fraunhofer Institute for Large Structures in Production Engineering
Albert-Einstein-Str. 30
18059 Rostock, Germany
Prof. Dr.-Ing. Wilko Flügge
Dr.-Ing. Oliver Brätz

Acknowledgement

Research association: FOSTA – Research Association for Steel Application

The research project HighDeformWeld is funded by the Federal Ministry of Economic Affairs and Energy as part of the "Industrial Collective Research" programme on the basis of a resolution of the German Bundestag. This project 24620N / P 1547 from the Research Association for steel Application (FOSTA), Düsseldorf, is carried out at Institute of Structural Design (Stuttgart), Production Technology Group (Ilmenau) and Fraunhofer Institute for Large Structures in Production Engineering (Rostock).

Project Duration

01/12/2025 – 31/05/2028

Publications

Contact Person

To the top of the page